| |
 |
Lamination Station
Model: UD1Dancer | Sur-Feed Roll Feed Assembly
Our Customer required a system with a unwind roll having the following dimensions of 3” core, 18” or less OD, up to 8” wide weighing under 50 lbs. The web guided by the rollers into the Sur-Feed motorized feeder. The Sur-Feed has an AC motor with a variable speed control to provide flexibility during the process. The customer’s process was before the feed rollers. Second set of rollers and a dancer assembly guides the material into the rewind. The web speed is to be controlled by the Sur-Feed roll feeder. The unwind and rewind will run from dancer assemblies and will work independently of web speed. This simplifies the set up. The unwind and rewind become the slave to the unit and automatically adjust to the roll feeders performance. Simple to use. Bench mounted and requires 110vac and compressed air. |
| Specifications |
Model# UD1 Dancer Unwind/Rewind Stations- Unwind/rewind are be cantilever design
- Unit is powered by a variable speed motor and drive
- Drive motor maintains a consistent loop of material
- The dancer assembly will feedback the motor control creating consistent tension
- Rocker switch allows the unit to change
direction for easy setup and versatility.
- Unit can handle a roll of material with a maximum OD of 18", a maximum width of 8" on a 3" ID core weighing less than 50 lbs
Sur-Feed Roll Feed Assembly- Precision ground urethane drive rollers advance the material
- Top idler roller is spring-loaded
- Precision ground ball bearings, which require no lubrication
- A guide will help direct the material through the unit
- Linear ball bearing bushings
- Idler rollers will guide the web through the system from the unwind, through the feeder assembly to the rewind
BasePlate- ˝” thick aluminum plate clear anodized
- Integrated system where each unit is aligned for accurate tracking
- Adjustable leveling screws
- Free standing assembly is available
|
| Material |
| Copper and aluminum foil. Copper up to ˝ mil thick, Aluminum up to 1 mil thick. |
|
|
WARNING!!
UNIT MUST BE PROPERLY GUIDED AT ALL TIMES TO MEET ALL STATE, FEDERAL,
AND LOCAL REQUIREMENTS
|
|
