SUR-SIZE™ FG-400 CUT-TO-LENGTH ASSEMBLY WITH REMOTE LOCATABLE CONTROL PANEL AND DANCER UNWIND
SKU: CUSTOM CUT-TO-LENGTH 223040
Requirements:
This application required unwinding and precisely cutting sheets of heavy duty kraft paper from a roll form at various lengths.
Material:
- Various lengths of sheets of kraft paper from roll form up to 35.5”
- Material width: 13.5” [342.9mm]
- Material thickness: less than 5mm [0.19”]
Our Solution:
AZCO Corp. designed and manufactured a cut-to-length assembly with an unwind station to precisely cut sheets of heavy duty kraft paper from roll form at various lengths.
- Rolls of material are loaded onto the cantilevered unwind.
- Unwind station has a variable speed motor and control panel.
- A rocker switch allows the unit to change direction for easy setup and versatility.
- From the unwind, material travels under the dancer arm as it controls the speed and tension of the material web.
- Material travels over a series of idler rollers and into the cut-to-length station.
- A set of precision ground urethane rollers pulls the material into the cut-to-length station.
- Pressure between rollers is manually adjustable by the operator.
- A toggle switch allows for the operator to lift the idler roller to allow for easy setup of a new web.
- Unit can be operated in both automatic or manual modes with a dry contact one shot input.
- Material is then cut by a pneumatically operated D2 heat treated tool steel blade.
- Cut material then falls down a short safety enclosed exit chute.
- A jam sensor will automatically shut the unit down when there is no material exiting the knife assembly.
- The sensor is mounted in the middle of the web path.
- Unit has a color touch screen for easy setup and operation.
- Custom cut lengths and cycles can be input on the unit’s touch screen.
- Additional option of preset recipes allows the operator to set values of cut length, batch information, total cycles and eye settings.
- Unit requirements: Power requirements: 110 VAC 50-60 Hz [220 VAC available upon request] Air requirements: 2.75-6 bar [40-90PSI], 3.4 SCFM
